CodeChronicle

OBC 2006 Division B

7.2.2.

Version 0 — in force 31 December 2006

In force
Verified · covered Verified against the 2006-12-31–2007-04-01 consolidation, whose range covers the query date. How to read this

Provenance

OBC 1997 · continues from 7.2.2. — Pro

Base · O. Reg. 350/06 · ext← current

Original — base regulation

OBC 2012 · continues as 7.2.2. — Pro

7.2.2. — Fixtures

Content not available for this version.

7.2.2.1. — Surface Requirements

(1) Except for the area designed to be slip proof in such fixtures, every exposed area of a fixture shall have a smooth, hard corrosion-resistant surface that is free from flaws and blemishes that may interfere with cleaning.

Text · e-Laws consolidated snapshot

7.2.2.2. — Conformance to Standards

(1) Every water closet and urinal shall conform to the requirements in Article 7.6.4.2.v1

(2) Every vitreous china fixture shall conform to CAN/CSA-B45.1, “Ceramic Plumbing Fixtures”.

(3) Every enamelled cast iron fixture shall conform to CAN/CSA-B45.2, “Enamelled Cast Iron Plumbing Fixtures”.

(4) Every porcelain enamelled steel fixture shall conform to CAN/CSA-B45.3, “Porcelain-Enamelled Steel Plumbing Fixtures”.

(5) Every stainless steel fixture shall conform to CAN/CSA-B45.4, “Stainless Steel Plumbing Fixtures”.

(6) Every plastic fixture shall conform to CAN/CSA-B45.5, “Plastic Plumbing Fixtures”.

(7) Every hydromassage bathtub shall conform to CAN/CSA-B45.10, “Hydromassage Bathtubs”.

(8) Every macerating toilet system for single bathrooms shall conform to CAN/CSA-B45.9, “Macerating Systems and Related Components”.

Text · e-Laws consolidated snapshot

7.2.2.3. — Showers

(1) Every shower receptor shall be constructed and arranged so that water cannot leak through the walls or floor.

(2) Not more than 6 shower heads shall be served by a single shower drain.

(3) Where two or more shower heads are served by a shower drain, the floor shall be sloped and the drain located so that water from one head cannot flow over the area that serves another head.

(4) Except for column showers, when a battery of shower heads is installed, the horizontal distance between two adjacent shower heads shall be at least 750 mm.

Text · e-Laws consolidated snapshot

7.2.2.4. — Concealed Overflows

(1) A dishwashing sink and a food preparation sink shall not have concealed overflows.

Text · e-Laws consolidated snapshot

7.2.2.5. — Water Closets in Public Washrooms

(1) Except for Eastern-Style toilets, where a water closet is installed in a washroom for public use it shall be of the elongated type and provided with a seat of the open front type.

Text · e-Laws consolidated snapshot

7.2.2.6. — Lavatories

(1) A lavatory that does not have an overflow shall be equipped with a centre outlet waste fitting.

Text · e-Laws consolidated snapshot

7.2.2.7. — Trough Urinals

(1) No trough urinal shall be used as part of a plumbing system.

Text · e-Laws consolidated snapshot