OBC 2006 › Division B
7.2.7.4.
Version 2 — in force 1 January 2010
This looks wrong
Tell us what is wrong and we will verify & correct our mapping.
- Edition
- OBC_2006
- Division
- B
- Provision
- 7.2.7.4.
- Version
- v2
240. (1) Subject to subsections (2), (3), (4), (5), (6) and (7), this Regulation comes into force on the later of January 1, 2010 and the day this Regulation is filed.
Read directly from the regulation's own commencement section.
O. Reg. 503/09 · commencement 240(1)
This version stayed in force until the next edition replaced it. What follows is that edition’s base regulation’s commencement — the takeover that ended this one.
(1) Subject to Sentences (2) and (3), this Regulation comes into force on January 1, 2014.
Read directly from the regulation's own commencement section.
O. Reg. 332/12 · commencement 4.4.1.1(1)
This looks wrong
Tell us what is wrong and we will verify & correct our mapping.
- Edition
- OBC_2006
- Division
- B
- Provision
- 7.2.7.4.
- Version
- v2
240. (1) Subject to subsections (2), (3), (4), (5), (6) and (7), this Regulation comes into force on the later of January 1, 2010 and the day this Regulation is filed.
Read directly from the regulation's own commencement section.
O. Reg. 503/09 · commencement 240(1)
This version stayed in force until the next edition replaced it. What follows is that edition’s base regulation’s commencement — the takeover that ended this one.
(1) Subject to Sentences (2) and (3), this Regulation comes into force on January 1, 2014.
Read directly from the regulation's own commencement section.
O. Reg. 332/12 · commencement 4.4.1.1(1)
Provenance
OBC 1997 · continues from 7.2.7.4. — Pro
Base · O. Reg. 350/06 · ext v0 →
O. Reg. 137/07, cl. 36 · ext v1 →
In force 2007-04-02
O. Reg. 503/09, cl. 92 · ext ← current
In force 2010-01-01
OBC 2012 · continues as 7.2.7.4. — Pro
7.2.7.4. — Copper Tube
Comparing versions
Changed text stands out · unchanged is dimmed
v1 O. Reg. 137/07
Earlier · 2007-04-02(1) Copper tube in a plumbing system shall,
(a) be certified to ASTM B88, “Seamless Copper Water Tube”, or
(b) comply with ASTM B306, “Copper Drainage Tube (DWV)”.
(2) The use of copper tube shall conform to Table 7.2.7.4.
(3) Copper tube used in a plumbing appliance shall conform to,
(a) ASTM B88, “Seamless Copper Water Tube”, or
(b) ASTM B68, “Seamless Copper Tube”.
(4) Type K or L copper tube shall be used for the potable water side of a heat exchanger in a pre-engineered wastewater heat recovery system.
v2 O. Reg. 503/09
Later · viewing · 2010-01-01(1) Copper tube in a plumbing system shall,
(a) be certified to ASTM B88, “Seamless Copper Water Tube”, or
(b) comply with ASTM B306, “Copper Drainage Tube (DWV)”.
(2) The use of copper tube shall conform to Table 7.2.7.4.
(3) Copper tube used in a plumbing appliance shall conform to,
(a) ASTM B88, “Seamless Copper Water Tube”, or
(b) ASTM B68, “Seamless Copper Tube”.
(4) Type K or L copper tube shall be used for the potable water side of a heat exchanger in a pre-engineered wastewater heat recovery system.
Provenance
OBC 1997 · continues from 7.2.7.4. — Pro
Base · O. Reg. 350/06 · ext v0 → compare
O. Reg. 137/07, cl. 36 · ext v1 →
In force 2007-04-02 comparing ×
O. Reg. 503/09, cl. 92 · ext ← current
In force 2010-01-01
OBC 2012 · continues as 7.2.7.4. — Pro