OBC 2006 › Division B
7.2.7.4.
Version 0 — in force 31 December 2006
This looks wrong
Tell us what is wrong and we will verify & correct our mapping.
- Edition
- OBC_2006
- Division
- B
- Provision
- 7.2.7.4.
- Version
- v0
(1) This Regulation comes into force on December 31, 2006.
Read directly from the regulation's own commencement section.
O. Reg. 350/06 · commencement 2.2.1.1(1)
This version stayed in force until the next one commenced. What follows is that next version’s commencement — the event that ended this one.
80. (1) Subject to subsection (2), this Regulation comes into force on the day it is filed.
Read directly from the regulation's own commencement section.
O. Reg. 137/07 · commencement 80(1)
This looks wrong
Tell us what is wrong and we will verify & correct our mapping.
- Edition
- OBC_2006
- Division
- B
- Provision
- 7.2.7.4.
- Version
- v0
(1) This Regulation comes into force on December 31, 2006.
Read directly from the regulation's own commencement section.
O. Reg. 350/06 · commencement 2.2.1.1(1)
This version stayed in force until the next one commenced. What follows is that next version’s commencement — the event that ended this one.
80. (1) Subject to subsection (2), this Regulation comes into force on the day it is filed.
Read directly from the regulation's own commencement section.
O. Reg. 137/07 · commencement 80(1)
Provenance
OBC 1997 · continues from 7.2.7.4. — Pro
Base · O. Reg. 350/06 · ext← current
Original — base regulation
O. Reg. 137/07, cl. 36 · ext v1 →
In force 2007-04-02
O. Reg. 503/09, cl. 92 · ext v2 →
In force 2010-01-01
Next: O. Reg. 137/07, cl. 36 · ext (not in force until 2007-04-02) v1 →
OBC 2012 · continues as 7.2.7.4. — Pro
7.2.7.4. — Copper Tube
(1) Copper tube in a plumbing system shall,
(a) be certified to ASTM B88, “Seamless Copper Water Tube”, or
(b) comply with ASTM B306, “Copper Drainage Tube (DWV)”.
(2) The use of copper tube shall conform to Table 7.2.7.4.
(3) Copper tube used in a plumbing appliance shall conform to,
(a) ASTM B88, “Seamless Copper Water Tube”, or
(b) ASTM B68, “Seamless Copper Tube”.
(4) Type K or L copper tube shall be used for the potable water side of a heat exchanger in a pre-engineered wastewater heat recovery system.
Editor's note
In the notes to Table 7.2.7.4., the 'Not Permitted' legend is filed in O. Reg. 350/06 with a space before the dash ('NP – Not Permitted') and the notes heading appears in bold; this map reproduces the source as filed. The e-Laws consolidation closes that spacing ('NP–') and renders the heading in regular weight. These formatting differences were not enacted by an amending regulation.
Text · e-Laws consolidated snapshot
Column 1 | Column 2 | Column 3 | Column 4 | Column 5 | Column 6 | Column 7 | Column 8 |
Type of Copper Tube or Pipe | Water Distribution System | Building Sewer | Drainage System | Venting System | |||
Under ground | Above ground | Under ground | Above ground | Under ground | Above ground | ||
K & L hard | N | P | P | P | P | P | P |
K & L soft | P | P | N | N | N | N | N |
M hard | N | P | N | N | P | N | P |
M soft | N | N | N | N | N | N | N |
DWV | N | N | N | N | P | N | P |
Notes to Table 7.2.7.4.:
P – Permitted
NP – Not Permitted
Provenance
OBC 1997 · continues from 7.2.7.4. — Pro
Base · O. Reg. 350/06 · ext← current
Original — base regulation
O. Reg. 137/07, cl. 36 · ext v1 →
In force 2007-04-02 compare
O. Reg. 503/09, cl. 92 · ext v2 →
In force 2010-01-01 compare
Next: O. Reg. 137/07, cl. 36 · ext (not in force until 2007-04-02) v1 →
OBC 2012 · continues as 7.2.7.4. — Pro