OBC 2006 › Division B
9.23.16.2.
Version 1 — in force 1 January 2010
This looks wrong
Tell us what is wrong and we will verify & correct our mapping.
- Edition
- OBC_2006
- Division
- B
- Provision
- 9.23.16.2.
- Version
- v1
240. (1) Subject to subsections (2), (3), (4), (5), (6) and (7), this Regulation comes into force on the later of January 1, 2010 and the day this Regulation is filed.
Read directly from the regulation's own commencement section.
O. Reg. 503/09 · commencement 240(1)
This version stayed in force until the next edition replaced it. What follows is that edition’s base regulation’s commencement — the takeover that ended this one.
(1) Subject to Sentences (2) and (3), this Regulation comes into force on January 1, 2014.
Read directly from the regulation's own commencement section.
O. Reg. 332/12 · commencement 4.4.1.1(1)
This looks wrong
Tell us what is wrong and we will verify & correct our mapping.
- Edition
- OBC_2006
- Division
- B
- Provision
- 9.23.16.2.
- Version
- v1
240. (1) Subject to subsections (2), (3), (4), (5), (6) and (7), this Regulation comes into force on the later of January 1, 2010 and the day this Regulation is filed.
Read directly from the regulation's own commencement section.
O. Reg. 503/09 · commencement 240(1)
This version stayed in force until the next edition replaced it. What follows is that edition’s base regulation’s commencement — the takeover that ended this one.
(1) Subject to Sentences (2) and (3), this Regulation comes into force on January 1, 2014.
Read directly from the regulation's own commencement section.
O. Reg. 332/12 · commencement 4.4.1.1(1)
Provenance
OBC 1997 · continues from 9.23.16.2. — Pro
Base · O. Reg. 350/06 · ext v0 →
O. Reg. 503/09, cl. 177 · ext ← current
In force 2010-01-01
OBC 2012 · continues as 9.23.16.2. — Pro
9.23.16.2. — Thickness, Rating and Material Standards
(1) Where wall sheathing is required, it shall conform to Table 9.23.16.2.A. or Table 9.23.16.2.B.
Text · e-Laws consolidated snapshot
Column 1 | Column 2 | Column 3 | Column 4 |
Type of Sheathing | Minimum Thickness, mm(1) | Material Standards | |
With Supports 400 mm o.c. | With Supports 600 mm o.c. | ||
Fibreboard (insulating) | 9.5 | 11.1 | CAN/ULC-S706 |
Gypsum Sheathing | 9.5 | 12.7 | CAN/CSA-A82.27-M |
ASTM C1177 / C1177M | |||
ASTM C1396 / C1396M | |||
Lumber | 17.0 | 17.0 | See Table 9.3.2.1. |
Mineral Fibre, Rigid Board, Type 2 | 25 | 25 | CAN/ULC-S702 |
OSB, O-2 Grade | 6.0 | 7.5 | CSA O437.0 |
OSB, O-1 Grade, and Waferboard, R-1 Grade | 6.35 | 7.9 | CSA O437.0 |
Phenolic, faced | 25 | 25 | CAN/CGSB-51.25-M |
Plywood (exterior type) | 6 | 7.5 | CSA O121-M |
CSA O151 | |||
CSA O153-M | |||
Polystyrene, Types 1 and 2 | 38 | 38 | CAN/ULC-S701 |
Polystyrene, Types 3 and 4 | 25 | 25 | CAN/ULC-S701 |
Polyurethane and Polyisocycanurate Type 1, faced | 38 | 38 | CAN/ULC-S704 |
Polyurethane and Polyisocycanurate Types 2 and 3, faced | 25 | 25 | CAN/ULC-S704 |
Notes to Table 9.23.16.2.A.:
(1)See also Sentences 9.27.5.1.(2) to (4).
Column 1 | Column 2 |
Maximum Spacing of Supports, mm | Panel Mark |
400 | W16 |
500 | W20 |
600 | W24 |
Provenance
OBC 1997 · continues from 9.23.16.2. — Pro
Base · O. Reg. 350/06 · ext v0 → compare
O. Reg. 503/09, cl. 177 · ext ← current
In force 2010-01-01
OBC 2012 · continues as 9.23.16.2. — Pro