OBC 2006 › Division B
9.21.5.
Version 0 — in force 31 December 2006
This looks wrong
Tell us what is wrong and we will verify & correct our mapping.
- Edition
- OBC_2006
- Division
- B
- Provision
- 9.21.5.
- Version
- v0
(1) This Regulation comes into force on December 31, 2006.
Read directly from the regulation's own commencement section.
O. Reg. 350/06 · commencement 2.2.1.1(1)
This version stayed in force until the next edition replaced it. What follows is that edition’s base regulation’s commencement — the takeover that ended this one.
(1) Subject to Sentences (2) and (3), this Regulation comes into force on January 1, 2014.
Read directly from the regulation's own commencement section.
O. Reg. 332/12 · commencement 4.4.1.1(1)
This looks wrong
Tell us what is wrong and we will verify & correct our mapping.
- Edition
- OBC_2006
- Division
- B
- Provision
- 9.21.5.
- Version
- v0
(1) This Regulation comes into force on December 31, 2006.
Read directly from the regulation's own commencement section.
O. Reg. 350/06 · commencement 2.2.1.1(1)
This version stayed in force until the next edition replaced it. What follows is that edition’s base regulation’s commencement — the takeover that ended this one.
(1) Subject to Sentences (2) and (3), this Regulation comes into force on January 1, 2014.
Read directly from the regulation's own commencement section.
O. Reg. 332/12 · commencement 4.4.1.1(1)
Provenance
OBC 1997 · continues from 9.21.5. — Pro
Base · O. Reg. 350/06 · ext← current
Original — base regulation
OBC 2012 · continues as 9.21.5. — Pro
9.21.5. — Clearance from Combustible Construction
Content not available for this version.
9.21.5.1. — Clearance from Combustible Materials
(1) The clearance between masonry or concrete chimneys and combustible framing material shall be not less than,
(a) 50 mm for interior chimneys, and
(b) 12 mm for exterior chimneys.
(2) A clearance of not less than 150 mm shall be provided between a cleanout opening and combustible material.
(3) Combustible flooring, subflooring and ceiling finishes shall have not less than a 12 mm clearance from masonry or concrete chimneys.
Text · e-Laws consolidated snapshot
9.21.5.2. — Sealing of Spaces
(1) All spaces between masonry or concrete chimneys and combustible material shall be sealed top or bottom with noncombustible material.
Text · e-Laws consolidated snapshot
9.21.5.3. — Support of Joists or Beams
(1) Joists or beams may be supported on masonry walls that enclose chimney flues provided the combustible members are separated from the flue by a minimum of 290 mm of solid masonry.
Text · e-Laws consolidated snapshot
Provenance
OBC 1997 · continues from 9.21.5. — Pro
Base · O. Reg. 350/06 · ext← current
Original — base regulation
OBC 2012 · continues as 9.21.5. — Pro