OBC 2006 › Division B
11.3.3.2.
Version 0 — in force 31 December 2006
This looks wrong
Tell us what is wrong and we will verify & correct our mapping.
- Edition
- OBC_2006
- Division
- B
- Provision
- 11.3.3.2.
- Version
- v0
(1) This Regulation comes into force on December 31, 2006.
Read directly from the regulation's own commencement section.
O. Reg. 350/06 · commencement 2.2.1.1(1)
This version stayed in force until the next one commenced. What follows is that next version’s commencement — the event that ended this one.
15. This Regulation comes into force on April 1, 2010.
Read directly from the regulation's own commencement section.
O. Reg. 205/08 · commencement 15
This looks wrong
Tell us what is wrong and we will verify & correct our mapping.
- Edition
- OBC_2006
- Division
- B
- Provision
- 11.3.3.2.
- Version
- v0
(1) This Regulation comes into force on December 31, 2006.
Read directly from the regulation's own commencement section.
O. Reg. 350/06 · commencement 2.2.1.1(1)
This version stayed in force until the next one commenced. What follows is that next version’s commencement — the event that ended this one.
15. This Regulation comes into force on April 1, 2010.
Read directly from the regulation's own commencement section.
O. Reg. 205/08 · commencement 15
Provenance
OBC 1997 · continues from 11.3.3.2. — Pro
Base · O. Reg. 350/06 · ext← current
Original — base regulation
O. Reg. 205/08, cl. 11(2) · ext v1 →
In force 2010-04-01
Next: O. Reg. 205/08, cl. 11(2) · ext (not in force until 2010-04-01) v1 →
OBC 2012 · continues as 11.3.3.2. — Pro
11.3.3.2. — Extensive Renovation
(1) Where existing interior walls or ceilings or floor assemblies or roof assemblies are substantially removed in an existing building and new interior walls, ceilings, or floor assemblies are installed in the building, structural and fire-resistance elements shall be constructed in compliance with the requirements of the other Parts.
(2) Except as provided in Section 11.5., the proposed construction within an existing suite shall comply with the requirements of Section 3.8. where,
(a) the existing interior walls or floor assemblies within the suite are substantially removed in an existing building,
(b) new interior walls or floor assemblies are installed,
(c) the suite has an area greater than 300 m2, and
(d) the suite is located on,
(i) a floor area where the existing difference in elevation between the adjacent ground level and the floor level is not more than 200 mm., or
(ii) a normally occupied floor area which is accessible by a passenger type elevator or other platform equipped passenger elevating device from an entrance storey where the existing difference in elevation between the adjacent ground level and the entrance storey level is not more than 200 mm.
Text · e-Laws consolidated snapshot
Provenance
OBC 1997 · continues from 11.3.3.2. — Pro
Base · O. Reg. 350/06 · ext← current
Original — base regulation
O. Reg. 205/08, cl. 11(2) · ext v1 →
In force 2010-04-01 compare
Next: O. Reg. 205/08, cl. 11(2) · ext (not in force until 2010-04-01) v1 →
OBC 2012 · continues as 11.3.3.2. — Pro