OBC 2006 › Division B

9.29.6.1.

Version 0 — in force 31 December 2006

In force

Verified · covered Verified against the 2006-12-31–2007-04-01 consolidation, whose range covers the query date. How to read this

In force

Verified · covered Verified against the 2006-12-31–2007-04-01 consolidation, whose range covers the query date. How to read this

Provenance

OBC 1997 · continues from 9.29.6.1. — Pro

Base · O. Reg. 350/06 · ext← current

Original — base regulation

OBC 2012 · continues as 9.29.6.1. — Pro

9.29.6.1. — Thickness

(1) Except as provided in Sentences (2) and (3), the minimum thickness of plywood interior finish shall conform to Table 9.29.6.1.

(2) A manufacturing tolerance of – 0.4 mm may be applied to the thicknesses listed in Table 9.29.6.1.

(3) No minimum thickness is required where plywood is applied over continuous backing.

Editor's note

In the notes to Table-9.29.6.1., the footnote reference numbers are presented inline with a separating space; the e-Laws consolidation renders them as superscript abutting the text. The footnote text is identical.

Text · e-Laws consolidated snapshot

Table 9.29.6.1. Thickness of Plywood Interior Finish Forming Part of Articles 9.29.6.1., 9.29.6.2. and 9.29.9.2.

Column 1	Column 2	Column 3
Maximum Spacing of Supports, mm o.c.	Minimum Thickness, mm⁽¹⁾, on Supports with no Horizontal Blocking	Minimum Thickness, mm⁽¹⁾, on Supports with Blocking at Vertical Intervals not Exceeding 1.2 m
400	4.7	4.0
600	8.0	4.7

Notes to Table 9.29.6.1.

⁽¹⁾Thickness limits shall apply to the net effective thickness (NET) of grooved, striated, textured and/or embossed panels and to the actual thickness of flat panels.