OBC 2006 › Division B
9.27.6.
Version 0 — in force 31 December 2006
This looks wrong
Tell us what is wrong and we will verify & correct our mapping.
- Edition
- OBC_2006
- Division
- B
- Provision
- 9.27.6.
- Version
- v0
(1) This Regulation comes into force on December 31, 2006.
Read directly from the regulation's own commencement section.
O. Reg. 350/06 · commencement 2.2.1.1(1)
This version stayed in force until the next edition replaced it. What follows is that edition’s base regulation’s commencement — the takeover that ended this one.
(1) Subject to Sentences (2) and (3), this Regulation comes into force on January 1, 2014.
Read directly from the regulation's own commencement section.
O. Reg. 332/12 · commencement 4.4.1.1(1)
This looks wrong
Tell us what is wrong and we will verify & correct our mapping.
- Edition
- OBC_2006
- Division
- B
- Provision
- 9.27.6.
- Version
- v0
(1) This Regulation comes into force on December 31, 2006.
Read directly from the regulation's own commencement section.
O. Reg. 350/06 · commencement 2.2.1.1(1)
This version stayed in force until the next edition replaced it. What follows is that edition’s base regulation’s commencement — the takeover that ended this one.
(1) Subject to Sentences (2) and (3), this Regulation comes into force on January 1, 2014.
Read directly from the regulation's own commencement section.
O. Reg. 332/12 · commencement 4.4.1.1(1)
Provenance
OBC 1997 · continues from 9.27.6. — Pro
Base · O. Reg. 350/06 · ext← current
Original — base regulation
OBC 2012 · continues as 9.27.6. — Pro
9.27.6. — Lumber Siding
Content not available for this version.
9.27.6.1. — Materials
(1) Lumber siding shall be sound, free of knot holes, loose knots, through checks or splits.
Text · e-Laws consolidated snapshot
9.27.6.2. — Thickness and Width
(1) Drop, rustic, novelty, lapped board and vertical wood siding shall be not less than 14.3 mm thick and not more than 286 mm wide.
(2) Bevel siding shall be,
(a) not less than 5 mm thick at the top, and
(b) not less than,
(i) 12 mm thick at the butt for sidings 184 mm or less in width, and
(ii) 14.3 mm thick at the butt for sidings wider than 184 mm.
(3) Bevel siding shall be not more than 286 mm wide.
Text · e-Laws consolidated snapshot
9.27.6.3. — Joints
(1) Lumber siding shall prevent water from entering at the joints by the use of lapped or matched joints or by vertical wood battens.
(2) Siding shall overlap not less than 1 mm per 16 mm width of lumber, but not less than,
(a) 9.5 mm for matched siding,
(b) 25 mm for lapped bevel siding, or
(c) 12 mm for vertical battens.
Text · e-Laws consolidated snapshot
Provenance
OBC 1997 · continues from 9.27.6. — Pro
Base · O. Reg. 350/06 · ext← current
Original — base regulation
OBC 2012 · continues as 9.27.6. — Pro