CodeChronicle

OBC 2006 Division B

9.23.15.4.

Version 0 — in force 31 December 2006

In force
Verified · covered Verified against the 2006-12-31–2007-04-01 consolidation, whose range covers the query date. How to read this

Provenance

OBC 1997 · renumbered from 9.23.15.3. — Pro

Base · O. Reg. 350/06 · ext← current

Original — base regulation

OBC 2012 · continues as 9.23.15.4. — Pro

9.23.15.4. — Joints in Panel-Type Sheathing

(1) Panel-type sheathing board shall be applied so that joints perpendicular to the roof ridge are staggered where,

(a) the sheathing is applied with the surface grain parallel to the roof ridge, and

(b) the thickness of the sheathing is such that the edges are required to be supported.

(2) A gap of not less than 2 mm shall be left between sheets of plywood, OSB or waferboard.

Text · e-Laws consolidated snapshot