OBC 2006 › Division B
9.20.10.
Version 0 — in force 31 December 2006
This looks wrong
Tell us what is wrong and we will verify & correct our mapping.
- Edition
- OBC_2006
- Division
- B
- Provision
- 9.20.10.
- Version
- v0
(1) This Regulation comes into force on December 31, 2006.
Read directly from the regulation's own commencement section.
O. Reg. 350/06 · commencement 2.2.1.1(1)
This version stayed in force until the next edition replaced it. What follows is that edition’s base regulation’s commencement — the takeover that ended this one.
(1) Subject to Sentences (2) and (3), this Regulation comes into force on January 1, 2014.
Read directly from the regulation's own commencement section.
O. Reg. 332/12 · commencement 4.4.1.1(1)
This looks wrong
Tell us what is wrong and we will verify & correct our mapping.
- Edition
- OBC_2006
- Division
- B
- Provision
- 9.20.10.
- Version
- v0
(1) This Regulation comes into force on December 31, 2006.
Read directly from the regulation's own commencement section.
O. Reg. 350/06 · commencement 2.2.1.1(1)
This version stayed in force until the next edition replaced it. What follows is that edition’s base regulation’s commencement — the takeover that ended this one.
(1) Subject to Sentences (2) and (3), this Regulation comes into force on January 1, 2014.
Read directly from the regulation's own commencement section.
O. Reg. 332/12 · commencement 4.4.1.1(1)
Provenance
OBC 1997 · continues from 9.20.10. — Pro
Base · O. Reg. 350/06 · ext← current
Original — base regulation
OBC 2012 · continues as 9.20.10. — Pro
9.20.10. — Lateral Support
Content not available for this version.
9.20.10.1. — Lateral Support Required
(1) Masonry walls shall be laterally supported by floor or roof construction or by intersecting masonry walls or buttresses.
(2) The spacing of supports required in Sentence (1) shall be not more than,
(a) 20 times the wall thickness for all loadbearing walls and exterior non-loadbearing walls, and
(b) 36 times the wall thickness for interior non-loadbearing walls.
(3) In applying Sentence (2), the thickness of cavity walls shall be taken as the greater of,
(a) two-thirds of the sum of the thicknesses of the wythes, or
(b) the thickness of the thicker wythe.
(4) Floor and roof constructions providing lateral support for walls as required in Sentence (1) shall be constructed to transfer lateral loads to walls or buttresses approximately at right angles to the laterally supported walls.
Text · e-Laws consolidated snapshot
Provenance
OBC 1997 · continues from 9.20.10. — Pro
Base · O. Reg. 350/06 · ext← current
Original — base regulation
OBC 2012 · continues as 9.20.10. — Pro