OBC 2006 › Division B
7.3.7.
Version 0 — in force 31 December 2006
This looks wrong
Tell us what is wrong and we will verify & correct our mapping.
- Edition
- OBC_2006
- Division
- B
- Provision
- 7.3.7.
- Version
- v0
(1) This Regulation comes into force on December 31, 2006.
Read directly from the regulation's own commencement section.
O. Reg. 350/06 · commencement 2.2.1.1(1)
This version stayed in force until the next edition replaced it. What follows is that edition’s base regulation’s commencement — the takeover that ended this one.
(1) Subject to Sentences (2) and (3), this Regulation comes into force on January 1, 2014.
Read directly from the regulation's own commencement section.
O. Reg. 332/12 · commencement 4.4.1.1(1)
This looks wrong
Tell us what is wrong and we will verify & correct our mapping.
- Edition
- OBC_2006
- Division
- B
- Provision
- 7.3.7.
- Version
- v0
(1) This Regulation comes into force on December 31, 2006.
Read directly from the regulation's own commencement section.
O. Reg. 350/06 · commencement 2.2.1.1(1)
This version stayed in force until the next edition replaced it. What follows is that edition’s base regulation’s commencement — the takeover that ended this one.
(1) Subject to Sentences (2) and (3), this Regulation comes into force on January 1, 2014.
Read directly from the regulation's own commencement section.
O. Reg. 332/12 · commencement 4.4.1.1(1)
Provenance
OBC 1997 · continues from 7.3.7. — Pro
Base · O. Reg. 350/06 · ext← current
Original — base regulation
OBC 2012 · continues as 7.3.7. — Pro
7.3.7. — Testing of Potable Water Systems
Content not available for this version.
7.3.7.1. — Application of Tests
(1) After a section of a potable water system has been completed, and before it is placed in operation, a water test or an air test shall be conducted.
(2) A test may be applied to each section of the system or to the system as a whole.
(3) Where a prefabricated system is assembled off the building site in such a manner that it cannot be inspected and tested on site, off-site inspections and tests shall be conducted.
(4) Where a prefabricated system is installed as part of a water system,
(a) all other plumbing work shall be tested and inspected, and
(b) the complete system shall be pressure tested.
Text · e-Laws consolidated snapshot
7.3.7.2. — Tests of Potable Water Systems
(1) Every potable water system shall be capable of,
(a) withstanding without leakage a water pressure that is at least 1000 kPa for at least 1 h, or
(b) withstanding for at least 2 h without a drop in pressure an air pressure that is at least 700 kPa.
Text · e-Laws consolidated snapshot
7.3.7.3. — Water Tests
(1) Where a water test is made all air shall be expelled from the system before fixture control valves or faucets are closed.
(2) Potable water shall be used to test a potable water system.
Text · e-Laws consolidated snapshot
Provenance
OBC 1997 · continues from 7.3.7. — Pro
Base · O. Reg. 350/06 · ext← current
Original — base regulation
OBC 2012 · continues as 7.3.7. — Pro