OBC 2006 › Division B
7.2.8.1.
Version 0 — in force 31 December 2006
This looks wrong
Tell us what is wrong and we will verify & correct our mapping.
- Edition
- OBC_2006
- Division
- B
- Provision
- 7.2.8.1.
- Version
- v0
(1) This Regulation comes into force on December 31, 2006.
Read directly from the regulation's own commencement section.
O. Reg. 350/06 · commencement 2.2.1.1(1)
This version stayed in force until the next one commenced. What follows is that next version’s commencement — the event that ended this one.
240. (1) Subject to subsections (2), (3), (4), (5), (6) and (7), this Regulation comes into force on the later of January 1, 2010 and the day this Regulation is filed.
Read directly from the regulation's own commencement section.
O. Reg. 503/09 · commencement 240(1)
This looks wrong
Tell us what is wrong and we will verify & correct our mapping.
- Edition
- OBC_2006
- Division
- B
- Provision
- 7.2.8.1.
- Version
- v0
(1) This Regulation comes into force on December 31, 2006.
Read directly from the regulation's own commencement section.
O. Reg. 350/06 · commencement 2.2.1.1(1)
This version stayed in force until the next one commenced. What follows is that next version’s commencement — the event that ended this one.
240. (1) Subject to subsections (2), (3), (4), (5), (6) and (7), this Regulation comes into force on the later of January 1, 2010 and the day this Regulation is filed.
Read directly from the regulation's own commencement section.
O. Reg. 503/09 · commencement 240(1)
Provenance
OBC 1997 · continues from 7.2.8.1. — Pro
Base · O. Reg. 350/06 · ext← current
Original — base regulation
O. Reg. 503/09, cl. 93 · ext v1 →
In force 2010-01-01
Next: O. Reg. 503/09, cl. 93 · ext (not in force until 2010-01-01) v1 →
OBC 2012 · continues as 7.2.8.1. — Pro
7.2.8.1. — Pipe and Fittings
(1) Pipes and fittings to be used for drainage and venting of acid and corrosive wastes shall conform to,
(a) ASTM A518/518M, “Corrosion-Resistant High-Silicon Iron Castings”,
(b) ASTM C1053, “Boronsilicate Glass Pipe and Fittings for Drain, Waste, and Vent (DWV) Applications”, or
(c) CAN/CSA-B181.3, “Polyolefin Laboratory Drainage Systems”.
Text · e-Laws consolidated snapshot
Provenance
OBC 1997 · continues from 7.2.8.1. — Pro
Base · O. Reg. 350/06 · ext← current
Original — base regulation
O. Reg. 503/09, cl. 93 · ext v1 →
In force 2010-01-01 compare
Next: O. Reg. 503/09, cl. 93 · ext (not in force until 2010-01-01) v1 →
OBC 2012 · continues as 7.2.8.1. — Pro