OBC 2006 › Division B
7.2.6.6.
Version 0 — in force 31 December 2006
This looks wrong
Tell us what is wrong and we will verify & correct our mapping.
- Edition
- OBC_2006
- Division
- B
- Provision
- 7.2.6.6.
- Version
- v0
(1) This Regulation comes into force on December 31, 2006.
Read directly from the regulation's own commencement section.
O. Reg. 350/06 · commencement 2.2.1.1(1)
This version stayed in force until the next one commenced. What follows is that next version’s commencement — the event that ended this one.
240. (1) Subject to subsections (2), (3), (4), (5), (6) and (7), this Regulation comes into force on the later of January 1, 2010 and the day this Regulation is filed.
Read directly from the regulation's own commencement section.
O. Reg. 503/09 · commencement 240(1)
This looks wrong
Tell us what is wrong and we will verify & correct our mapping.
- Edition
- OBC_2006
- Division
- B
- Provision
- 7.2.6.6.
- Version
- v0
(1) This Regulation comes into force on December 31, 2006.
Read directly from the regulation's own commencement section.
O. Reg. 350/06 · commencement 2.2.1.1(1)
This version stayed in force until the next one commenced. What follows is that next version’s commencement — the event that ended this one.
240. (1) Subject to subsections (2), (3), (4), (5), (6) and (7), this Regulation comes into force on the later of January 1, 2010 and the day this Regulation is filed.
Read directly from the regulation's own commencement section.
O. Reg. 503/09 · commencement 240(1)
Provenance
OBC 1997 · continues from 7.2.6.6. — Pro
Base · O. Reg. 350/06 · ext← current
Original — base regulation
O. Reg. 503/09, cl. 91 · ext v1 →
In force 2010-01-01
Next: O. Reg. 503/09, cl. 91 · ext (not in force until 2010-01-01) v1 →
OBC 2012 · continues as 7.2.6.6. — Pro
7.2.6.6. — Screwed Malleable Iron Water Fittings
Comparing versions
Changed text stands out · unchanged is dimmed
v0 base
Earlier · viewing · 2006-12-31(1) Screwed malleable iron water fittings shall conform to ANSI/ASME B16.3, “Malleable Iron Threaded Fittings”.
(2) Screwed malleable iron water fittings used in a water system shall be cement-mortar lined or galvanized.
(3) Screwed malleable iron water fittings shall not be used in a drainage system.
v1 O. Reg. 503/09
Later · 2010-01-01(1) Screwed malleable iron water fittings shall conform to ANSI/ASME B16.3, “Malleable Iron Threaded Fittings, Classes 150 and 300”.
(2) Screwed malleable iron water fittings used in a water system shall be cement-mortar lined or galvanized.
(3) Screwed malleable iron water fittings shall not be used in a drainage system.
Provenance
OBC 1997 · continues from 7.2.6.6. — Pro
Base · O. Reg. 350/06 · ext← current
Original — base regulation
O. Reg. 503/09, cl. 91 · ext v1 →
In force 2010-01-01 comparing ×
Next: O. Reg. 503/09, cl. 91 · ext (not in force until 2010-01-01) v1 →
OBC 2012 · continues as 7.2.6.6. — Pro