OBC 2006 › Division B
4.3.
Version 0 — in force 31 December 2006
This looks wrong
Tell us what is wrong and we will verify & correct our mapping.
- Edition
- OBC_2006
- Division
- B
- Provision
- 4.3.
- Version
- v0
(1) This Regulation comes into force on December 31, 2006.
Read directly from the regulation's own commencement section.
O. Reg. 350/06 · commencement 2.2.1.1(1)
This version stayed in force until the next edition replaced it. What follows is that edition’s base regulation’s commencement — the takeover that ended this one.
(1) Subject to Sentences (2) and (3), this Regulation comes into force on January 1, 2014.
Read directly from the regulation's own commencement section.
O. Reg. 332/12 · commencement 4.4.1.1(1)
This looks wrong
Tell us what is wrong and we will verify & correct our mapping.
- Edition
- OBC_2006
- Division
- B
- Provision
- 4.3.
- Version
- v0
(1) This Regulation comes into force on December 31, 2006.
Read directly from the regulation's own commencement section.
O. Reg. 350/06 · commencement 2.2.1.1(1)
This version stayed in force until the next edition replaced it. What follows is that edition’s base regulation’s commencement — the takeover that ended this one.
(1) Subject to Sentences (2) and (3), this Regulation comes into force on January 1, 2014.
Read directly from the regulation's own commencement section.
O. Reg. 332/12 · commencement 4.4.1.1(1)
Provenance
OBC 1997 · continues from 4.3. — Pro
Base · O. Reg. 350/06 · ext← current
Original — base regulation
OBC 2012 · continues as 4.3. — Pro
4.3. — Design Requirements for Structural Materials
Content not available for this version.
4.3.1. — Wood
Content not available for this version.
4.3.1.1. — Design Basis for Wood
(1) Buildings and their structural members made of wood shall conform to CAN/CSA-O86, “Engineering Design in Wood”.
Text · e-Laws consolidated snapshot
4.3.1.2. — Glue-Laminated Members
(1) Glued-laminated members shall be fabricated in plants conforming to CAN/CSA-O177-M, “Qualification Code for Manufacturers of Structural Glued-Laminated Timber”.
Text · e-Laws consolidated snapshot
4.3.1.3. — Termites
(1) In areas known to be infested by termites, the requirements in Articles 9.3.2.9.v1v2, 9.12.1.1. and 9.15.5.1. shall apply.
Text · e-Laws consolidated snapshot
4.3.2. — Plain and Reinforced Masonry
Content not available for this version.
4.3.2.1. — Design Basis for Plain and Reinforced Masonry
(1) Buildings and their structural members made of plain and reinforced masonry shall conform to CSA S304.1, “Design of Masonry Structures”.
Text · e-Laws consolidated snapshot
4.3.3. — Plain, Reinforced and Prestressed Concrete
Content not available for this version.
4.3.3.1. — Design Basis for Plain, Reinforced and Prestressed Concrete
(1) Buildings and their structural members made of plain, reinforced or prestressed concrete shall conform to CSA A23.3, “Design of Concrete Structures”.
Text · e-Laws consolidated snapshot
4.3.4. — Steel
Content not available for this version.
4.3.4.1. — Design Basis for Structural Steel
(1) Buildings and their structural members made of structural steel shall conform to CAN/CSA-S16, “Limit States Design of Steel Structures”.
Text · e-Laws consolidated snapshot
4.3.4.2. — Design Basis for Cold Formed Steel
(1) Buildings and their structural members made of cold formed steel shall conform to CAN/CSA-S136, “North American Specification for the Design of Cold-Formed Steel Structural Members”.
Text · e-Laws consolidated snapshot
4.3.4.3. — Steel Building Systems
(1) Steel building systems shall be manufactured by companies certified in accordance with the requirements of CSA-A660, “Certification of Manufacturers of Steel Building Systems”.
Text · e-Laws consolidated snapshot
4.3.5. — Aluminum
Content not available for this version.
4.3.5.1. — Design Basis for Aluminium
(1) Buildings and their structural members made of aluminum shall conform to CAN3-S157, “Strength Design in Aluminum”, using the loads stipulated in Section 4.1., in accordance with limit states design in Subsection 4.1.3.
Text · e-Laws consolidated snapshot
4.3.6. — Glass
Content not available for this version.
4.3.6.1. — Design Basis for Glass
(1) Glass used in buildings shall be designed in conformance with CAN/CGSB-12.20-M, “Structural Design of Glass for Buildings”.
Text · e-Laws consolidated snapshot
Provenance
OBC 1997 · continues from 4.3. — Pro
Base · O. Reg. 350/06 · ext← current
Original — base regulation
OBC 2012 · continues as 4.3. — Pro