OBC 2006 › Division B
4.2.3.8.
Version 0 — in force 31 December 2006
This looks wrong
Tell us what is wrong and we will verify & correct our mapping.
- Edition
- OBC_2006
- Division
- B
- Provision
- 4.2.3.8.
- Version
- v0
(1) This Regulation comes into force on December 31, 2006.
Read directly from the regulation's own commencement section.
O. Reg. 350/06 · commencement 2.2.1.1(1)
This version stayed in force until the next one commenced. What follows is that next version’s commencement — the event that ended this one.
240. (1) Subject to subsections (2), (3), (4), (5), (6) and (7), this Regulation comes into force on the later of January 1, 2010 and the day this Regulation is filed.
Read directly from the regulation's own commencement section.
O. Reg. 503/09 · commencement 240(1)
This looks wrong
Tell us what is wrong and we will verify & correct our mapping.
- Edition
- OBC_2006
- Division
- B
- Provision
- 4.2.3.8.
- Version
- v0
(1) This Regulation comes into force on December 31, 2006.
Read directly from the regulation's own commencement section.
O. Reg. 350/06 · commencement 2.2.1.1(1)
This version stayed in force until the next one commenced. What follows is that next version’s commencement — the event that ended this one.
240. (1) Subject to subsections (2), (3), (4), (5), (6) and (7), this Regulation comes into force on the later of January 1, 2010 and the day this Regulation is filed.
Read directly from the regulation's own commencement section.
O. Reg. 503/09 · commencement 240(1)
Provenance
OBC 1997 · continues from 4.2.3.8. — Pro
Base · O. Reg. 350/06 · ext← current
Original — base regulation
O. Reg. 503/09, cl. 62 · ext v1 →
In force 2010-01-01
Next: O. Reg. 503/09, cl. 62 · ext (not in force until 2010-01-01) v1 →
OBC 2012 · continues as 4.2.3.8. — Pro
4.2.3.8. — Steel Piles
(1) Where steel piles are used in deep foundations and act as permanent load-carrying members, the steel shall conform with one of the following standards:
(a) ASTM A252, “Welded and Seamless Steel Pipe Piles”,
(b) ASTM A283 / A283M, “Low and Intermediate Tensile Strength Carbon Steel Plates”,
(c) ASTM A1008 / A1008M , “Steel, Sheet, Cold Rolled, Carbon, Structural,High-Strength Low-Alloy and High-Strength Low-Alloy with Improved Formability”,
(d) ASTM A1011 / A1011M, “Steel, Sheet and Strip, Hot Rolled, Carbon, Structural, High Strength Low Alloy and High Strength Low Alloy with Improved Formability”, or
(e) CAN/CSA-G40.21, “Structural Quality Steel”.
Text · e-Laws consolidated snapshot
Provenance
OBC 1997 · continues from 4.2.3.8. — Pro
Base · O. Reg. 350/06 · ext← current
Original — base regulation
O. Reg. 503/09, cl. 62 · ext v1 →
In force 2010-01-01 compare
Next: O. Reg. 503/09, cl. 62 · ext (not in force until 2010-01-01) v1 →
OBC 2012 · continues as 4.2.3.8. — Pro